Description

BOOM DETAILS
New – BIK Tree-Care Series TC-70 (PM 23.5 ton/m)

6-hydraulic extensions & one manual grapple extn
Vertical Reach of 70’
Handles 3,800 lbs @ 70’ Vertical
HORIZONTAL Capacities:
9,800 lb @ 14’
5,900 lb @ 20’
4,330 lb @ 26’
2,560 lb @ 40’
1,750 lb @ 55’
408 Degrees Rotation on Main Hydraulic Slewing
Double pilot operated on slewing and pilot operated check valves on all cylinders, Hydraulic Oil Cooler, high pressure return filter and min. 40-gallon oil tank for boom
DANFOSS Proportional Valve Controls – single sided operator control station
Load Holding Valves on all cylinders
PM Power–Tronics electronic monitoring & load control with Stabilizer deployments sensors & didgital read-out on the remote
SCANRECO Radio Remote Control
Hydraulic OUT and Hydraulic DOWN Extra Wide – 21’ 6” span , 2-sided stabilizers w/ round foot pads welded to bottom of cylinder.
15 degree negative angle on folding arm – Hydraulic Overload Protection – simplified system that prevents boom from overload
Two functions plumbed to end of 6th extn, – Heavy Duty Pedestal Turning Cylinders for greater turning torque & reduced wear
Installed at rear on integral sub base / torque box, Engineer certified stability inspection & certificate,
Warranty: 1-Yr. parts & labour on entire boom, 3-Yr. on Structural Components

DECK DETAILS
New – 14’ long Steel Flat Deck:

4’ head board
8’ wide usable deck + stake pockets with rub rail
Steel checker plate Deck surface
5-sliding tie down winch straps on pass side
Dual access ladders at front& winch bar with holder
Integral sub-base / torque box To maximize torsion strength
DOT stickers and clearance lights as required.

TRUCK DETAILS
New – Freightliner M2-106 2- axle Truck – NON-CDL with 33,000 max GVWR

300 hp Cummins Diesel
Allison Auto Trans
12,000 lb fronts w/315 type 22.5 tires
21,000 lb rears, polished aluminum rims
Air Cond, 2-man pass seat, cruise, power windows/locks, tilt/tele steering, stereo, chrome bumper/grille, white color cab, etc…

Also Included:
(2) pcs – 2” PVC stabilizer pads – with holders
36” Alum storage boxes installed
Mecanil SG-220 Grapple saw with spare parts kit
Grapple saw holder/stowe bracket on side of frame near boom
BIK tech to familiarize boom operation at your facility for 2-3 days

Other Options at Extra Cost:
(1) Aluminum self evelling man basket
Drawplate with reese type pintle hook receiver with electric trailer brake actuator installed
(6) pcs removable log bunks to fit deck pockets
TC-78 version – with 8’ extra reach and comes with SG-160 Grapple saw, Handling 2,800 lbs @ 78’ Vertical Reach