PM 47.5 Mecanil Grapplesaw Truck

Barely used PM 47526 SP knuckleboom crane w/ J1214 jib, top seat and radio remote controls, Mecanil SG220 G2 grapplesaw, mounted on a used 2008 International Workstar truck w/ approx. 345,000 miles on a Cummins 350HP engine. Truck is very clean and runs great – turbo and electronic actuator was just replaced. Log bunks and mat rack on truck. This crane has just over 100 feet of vertical reach.

This crane has 6 hydraulic extensions on the main boom and 4 hydraulic extensions on the jib with a rated capacity of 1,210 lbs at 84 feet horizontal(hydraulic reach), with a tip height of 97 feet. The crane has very little hours in use.

Technical Data
Standard Crane Weight 14,000 lbs w/ jib
Slewing Rotation 410 degrees
No. of hydraulic hoses to end of main boom 8
No. of hydraulic hoses to end of jib 4
Controls
Ground No
Stand Up No
Top Seat Yes
Radio Remote Yes
Radio Remote Manufacturer Scanreco
Stabilizers (Outriggers)
Main Outriggers Hydraulic out and down
Rotating Yes
Aux. Outriggers Yes
Included Items
Hydraulic Pump Yes
PTO Yes
Oil Cooler Yes
Oil Tank Yes
Truck
Manufacturer International
Model Workstar
Year 2008
Engine
Manufacturer Cummins
Horsepower 350 HP
Mileage 335,000 miles
Transmission
Type Manual
Misc
Deck Length 18'

PM 48.5 w/ J1214 Load Chart

Horizontal Load Capacities (without jib)*

21,010 lbs @ 14’8″
14,660 lbs @ 20’4″
10,890 lbs @ 26’4″
  8,490 lbs @ 32’10”
  6,820 lbs @ 39’4″
  5,660 lbs @ 46’7″
  4,840 lbs @ 54’2″

Horizontal Load Capacities (with jib)*

1,890 lbs @ 63’8″
1,700 lbs @ 68’3″
1,520 lbs @ 73’9″
1,390 lbs @ 79’10”
1,280 lbs @ 85′

Deduct weight of attachment from these values

*Provided load capacities are for general reference only. Please consult the manufacturers official load charts/diagrams/user manual before purchasing and operating this crane.

File Downloads
PM 48526 SP J1214 Jib Load Charts  Download File

Contact Information

Todd Brady

USA:
786-361-8491
Canada:
613-483-7513

E-Mail Knuckleboom Trader

Your Name:

Your telephone number:

Email:

Your Message

SOLD
1-877-854-9848
ConditionNew, Used
MakePM
Model47526 SP
Year2017
Max Hyd Outreach84'4"
Tip Height97'
Max Lift Capacity21,010lbs
Hyd Extensions6
Man Extensions0
Fly-Jib ModelJ1214
Fly-Jib Extensions4
Capacity at Max Reach1,210 lbs @ 84'4"
Radio RemoteYes
WinchNo
Load Moment39tm
TruckYes
LocationGeorgia, USA

Knuckleboom Trader LLC helps bring together buyers and sellers of knuckleboom cranes and trucks. The terms of any sale remain subject to direct negotiation between the buyer and the seller. Please verify all details of the item before purchasing. Knuckleboom Trader LLC is not responsible for any errors in listing details or the condition of the cranes and trucks listed on KnuckleboomTrader.com