BIK SERIES FC-67 ON NEW 2020 KENWORTH T880 4-AXLE & 22′ 6″ STEEL DECK – 485 HP –

Price on request
STOCK ID: -

Description

BOOM DETAILS
NEW – BIK SERIES FORMING CRANE FC-67 UNLOADER
4 Hyd Extensions to 67’ Horizontal Reach. 70’ Actual Rearward Reach with Reverse-Mount Turret
Horizontal Capacities Are: 7,400 lb @ 28’, 3,100 lb @ 55’, 2,600 lb @ 62’, 2,300 lb @ 67’
Internal Cylinders on All Boom Extensions, Outer Boom Cylinder Guard
Rack & Pinion Type 390-Degree Non-Continuous Rotation, Mechanical Stop Between Main Boom and Boom Unit
Power Link Connections at Main and Articulating Cylinders, Enhanced Lifting Power Throughout
Extra Wide Stabilizers – 24’ 3” Span, Hydraulic Out and Down Type, 16’ Spread Supplementary Outriggers Installed at Front of Platform
Flanged Holding Valves, Double-Acting Check Valve for the Down Movement of the Stabilizers
Hydraulic Oil Cooler, High Pressure Return Filter and Min. 40-Gallon Oil Tank for Boom
DANFOSS Valve at Top Seat Level Controls with Access Ladder
Hydraulic Hook Rotator with T-Hook at End of Boom
SCANRECO Proportional Radio Remote Control Included: 2 Batteries, In-Cab Charger, and Back-up Cord
Crane Painted BIK Red, Load Chart on Boom in FT. & LBS.
New PTO and Hydraulic Pump
Load Tested & Installed End-of-Frame on Pre-Engineered Sub Base

DECK DETAILS
NEW – 22 ½’ X 102” STEEL CHECKER PLATE – LOW PROFILE: to Accommodate up to 9’2” Tall Form Cages
Installed on Pre-Engineered 6” Main Sill Sub Frame & Extension with X-Braces for Torsional Support
Tied to Truck Frame by Sheer Plating at Front, Center and Rear
Aluminum Deck Surface, 60”+ Headboard, Center Divider
4 Vertical-Mounted Winch Straps Mounted Ahead of Headboard to Wrap Around Cages for Transport
6 Under-Deck Sliding Tie-Down Winch Straps on Passenger Side, Winch Bar Holder and Winch Bar
Dual Ladder Access, Reflectors and Side Lights as Required by DOT Standards

TRUCK DETAILS
NEW – 2020 KENWORTH T880 4-AXLE TRUCK – 86,000 lbs GVWR
Cab White, Paccar 485 hp, 1,650 ft/lb Torque
Jake Brake, Eaton Ultra Shift Plus 18 Spd Automated Transmission
20,000 lb Front Steer Axle with 425/65R22.5 Tires on Aluminum Rims
20,000 lb Self-Steer Pusher Axle Installed Ahead of Tandem
46,000 lb Rears on Hendrickson Primax Suspension with 11R22.5 Tires on Aluminum Outer Rims
54” Spread at TA, Double Frame

Options Including: A/C, Tilt/Telescopic Steering, Power Windows & Locks, AM/FM/MP3 w/Bluetooth, Air Driver’s Seat and Standard Pass Seat, Cruise, Heated Mirrors, Stainless Exterior Sun Visor, Air Ride Cab, 4-Wheel Lock-ups, Trailer Air Tow Package, Chromed Front and Side Grill & Bumper, 100-Gal Alum Fuel Tank, etc…
Also Included:
Two Sets of Aluminum Stabilizer Pads with Holders Mounted on Truck
24” Aluminum Checker Plate Storage Box, Hydraulic Rotator
1” Drawplate Installed at Rear

Load Capacity Details
  • Max capacity 7,400 lbs
  • Capacity at max horizontal reach 2,300 lbs @ 67 ft 0 in
  • Capacity at max vertical reach 0 lbs @ 0 ft 0 in

Crane Details

  • Condition NEW
    Truck included Yes
  • Manufacturer BIK
    Model FC-67
  • Year 2023
    Radio RC Yes
  • Hydraulic Exts. 4
    Manual Exts. 0
  • Has a Jib No
    Jib Exts. 0
 

Truck Details

  • Condition NEW
  • Manufacturer Kenworth
    Model T880
  • Year 2023
    Transmission Automatic
  • Suspension Hendrickson Primax
    Deck Length 22.5 ft
Engine specifications
  • Manufacturer PACCAR
    Model
  • Horsepower 485
    Mileage 0 mi